...shift from gear to gear sometimes and not all the time.they seem to have a mind of their own.when we have the low gears we have no reverse,when we have reverse we only have high gear,also seems tobe ...
gear shift selector will not line up properly with letters on steering column ( P,R,N,D.1,2 ) and have a hard time shifting it into gear to start van. should I take it for repairs to a transmission ...
Gear Shift won't go into park. Shifter real sloppy. If it does go into Park it may slip out to reverse. Something with the shift linkage is messed up.
...shift out of first gear unless you really open up the engine! I've changed the modulator valve and the transmission filter! tested the shift moduels with an ohm meter they tested good! It dose not ...
1995 AWD shifts "hard"--kind of 1995 AWD shifts "hard"--kind of smacks into gear. When flush was done, the pan was clean. Don't know if previous owner had work done or not. FLUSH? thats ...
.....it is an automatic, it will let me put in shift down the column but it wont sho its in gear. My dash board shows it is in park....What could this be maybe the linkage is loose or needs to be ...
...gear shift, The cable should move freely. You can pull on the end of the cable to make sure it is not broken. Make sure that your tranny arm moves in all gears. Please chalk the wheels so you don't ...
...broke on the shifter. Before it broke, the shifter was loose, now it hangs free and will not change gears. Is this a job I can do myself? And will I have to pull the steering wheel to do it? check ...
gear shift When I start to drive it feels hard, it will not drive smooth, but it works fine and the gear shifts but it is loud. what do I need to do. Or what is the problem... Is this Manual or ...
Does not shift out of first gear until 25 mph. then runs fine ford truck? the shift point can be adjusted , small charge at any trans shop.
176 questions posted
Usually answered in minutes!
226 Questions
181 Questions
99 Questions
95 Questions
94 Questions