1992 Ford Explorer "ground wire fuel gage working" Questions

Ad

Question about Ford Explorer

1 Answer

...wire, ground it, while a helper watches the gage, if the gage starts reacting, then check the grounds for fuel pump wiring connector, if that checks ok, suspect the fuel pump sending unit has a ...

Ad

...WIRE FOR GROUND, & 1 WIRE FOR FUEL GAGE, THE FUEL GAGE WIRE GOES DIRECTLY TO GAGE , INSPECT THIS WIRE , MAY CHANGE COLOR ON ITS WAY TO GAGE, WIRE MAY HAVE BEEN DAMAGED UNDER TRUCK, ALONG FRAME ...

Ad

Question about Ford Explorer

1 Answer

fuel pump and grounding the yellow / white wire with 160 ohms resistance this should cause the gage to read full, and with the circuit open you should have the gage reading empty. If the gage works in

Question about Cars & Trucks

1 Answer

...Have someone take the wire off the sender unit at the fuel tank and touch it to ground If the gage goes to full tank the replace the sender unit. Could also be a broken wire from the gage to ...

...wire from ground to the y/w wire and it pegged out past full on the fuel gage. Hooked VOM to the backside of the yel/wht wire at the connection under the hood by the firewall and it jumps from 0 to ...

Question about Ford Explorer

1 Answer

...1500HD. My fuel gage does not work and I have filled my truck up. I have look in the owners manual but nothing help. you may want to chech the wires on the gauge (ground wire ) and terminals ...

...gage n the fuel gage not working. Changed fuel pump relay HELP Could be grounded out wiring somewhere. I'd start at one end and work to the other checking all of the wiring for breaks pinches and ...

...wire and ground wire in the connector block, go to the switch and turn it to run position. If the needle goes to full, the gage is good. Turn the switch off. Now, be sure the connection is plugged in ...

...wire, try un-hooking it from the tank and touching it to ground note the gage position.... now remove the ground and see if the gage changes position... if it does, its the sending unit or your ...

...not the gage. Pink wire with black tracer is voltage, black is ground. Yes, there should be an initial prime when you first turn key on, but, it doesn't last long. You can also check inertia

Not finding what you are looking for?
1992 Ford Explorer Logo

930 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...