1992 Ford Explorer "fan blade wrench" Questions

fan blade from the water pump -= the seal is leaking and i am replacing the seal behind the water pump - but i cannot figure out how to remove the fan blade . If you go to Auto Zone or some other auto

...fan blade with one hand and loosen the bolts most of the wrenches are designed to grab 2 of the studs coming out of pulley. i have never used the tool. after you see if the nut is reverse thread or ...

how to get the fan off the water pump There is a special 2 piece wrench like set that you can get at most auto parts stores form like 10 bucks. That pulls the weird set up off the fan blade.

...fan blade, blade is loose but not coming off. There are some special wrenches for removing this part. They can be borrowed from Autozone with a deposit. You need to be able to hold the bearing on one ...

...fan blade (8600), fan clutch and shroud. If the fan blade and fan clutch have to be separated, remove the remaining bolts attaching the fan blade to the fan clutch 5.0L, 5.8L and 7.5L Engines Removal ...

the plastic fan blade dis-connect the negative battery cable remove the upper fan shroud use a large cresent wrench and place it on the nut just behind the fan and unbolt it reverse to install new one

...fan blade on 04 trail blazer there is a big nut that is part of the fan clutch that unscrews from the water pump .I use a long punch to break it loose then a big adjustible wrench. RECOMMENDED TOOLS: ...

...fan blade loose from water pump on 1998 f-150 4.2 liter I seem to recall it is a left hand thread. They make tools for removal. The wrench I think is a 32 mm open end looking wrench and the part to ...

...fan then yes its pretty easy youll need a 10 or 13 millimeter wrench to pull the blades off just unscrew the bolts you may have to take the belt off in order to get the fan off but id wait until all ...

fan blade and remove the bolts with an open-end wrench. Once the fan blade is loose, remove it from the engine compartment. Remove the fan pulley from the front of the water pump by unbolting the four