1992 Ford Explorer "auto 4x4 problems" Questions

...do have 4x4 auto , although I was sliding all over today in the storm when I usually don't. what could be the problem?? Try inspecting the transfer case motor and any electrical attatched to it

...to lock if it is manual. or if auto hubs leave alone. then push button to 4x4. if its push button. if it doesnt light up then ya have a problem with the 4x4 and i can help you through that if need

4x4 auto / 4x4 high / 4x4 low). When running in 4x4 auto (normal running mode), making hard turns the front wheels clunk badly. I lifted vehicle clear of ground. Under low load (800-1000 rpm) just the

4x4 were continuing to flash on dash and cannot change back over to auto (switch on dash) now the truck (1997) is driving slower and sluggish and when stopping or turning making a thump noise and hard

my 1997 ford explorer 4x4 light flashes why? This is a indication that there is a problem with the auto-shift transfer case system.

auto 4x4 is trying to engage or disengage without reason? No other bad noises, and no problems in 4x4 or low range. Right front hub assembly is only 4K miles old, left side is original. You might just

...and they told me that my 4x4 driveshaft was kicking into auto over and over again. Had to take it off and it was fixed, but it led to front end issues. ( Front End binding and locking up in

...4x4 Unhook the battery and let it sit for about a half hour. This should reset the ecm. if ur resetting a check engine light problem or clearing codes from computer than go to an auto store most will ...

...auto, the 4x4 wil only hook if necessary. Try going on bad roads to see if it works. The differential should probably work in 4x4. The electric motor for the transfer should also be checked. It is ...

...auto 4x4 on my 1999 Ford Explorer? It is stuck in 4x4 I have been told it is electrical so I would like to unplug it and need to find replacement unit Transfer Case Motor or Encoder Motor-whatever ...