1991 Ford Explorer "reverse stops working auto transmission" Questions

...auto still shifted and ran o. k. then last night it stopped pulling i cut it off and checked fuild level it was fine. started engines trans worked fine for about five miles it stopped pulling and ...

REVERSE WORKS FINE. MESSED AROUND WITH IT ONE DAY SHIFTED IT INTO DRIVE IT WORKED. DROVE IT A MILE OR 2 THEN IT STOPPED AGAIN. WHAT COULD IT BE OR WHAT CAN I DO TO SOLVE IT sounds like the tranny pump

...auto.trans.Vehicle has high miles (unknown).When I put it in gear I have to speed the engine up about a thousand rpm's and it seems to work ok.Every time I stop I have to go through the same ...

Reverse gear stops working after a few days equal 500km, but all forward are still ok. Sounds like your transmission is going bad. If your transmission is slipping only in drive or forward gears, then

...reverse stoped working but it is goin in to reverse just not going barkward and its making a sound in the bellhousing Obvious transmission issue. Bad reverse clutch unlikely, but it is probably fluid ...

has reverse no forward gears forward gears stopped working but the reverse works just fine. 1993 Auto 4X4 Time for a transmission overhaul

...working except the reverse lights I also changed a light bulb on right side for the stop and parking lights, now working You need to replace the reverse light switch, this switch varies in location ...

...when i off the car and on it move a few meters and stop and drive forwards is smooth? so what the reason that reverse is not working at all? are you using auto gear or is your transmission manual

working, There is no forward, there is no reverse, there was no loud pop. It was still coasting. Do I need a new tranny or is it a sensor maybe? Question edited to remove the abbreviated 'transmission

...auto.. My car is Lantra NOT Elantra. Reverse gear barely works in my 1998 1.8l Lantra, which seems odd with automatic transmission. Reverse only works if I rev very hard, and it goes as if the brake ...