2001 Dodge Neon "cant run end day ups" Questions

...it. The other 3 he turns multiple times to tighten & the 1 only turns a couple times before he cant turn it anymore. Any solutions? Carefully inspect the threads it sounds as if you have a ...

end, not air cleaner, right. back fire to tail is caused by 2 reaons. engine runs rich as a pig, and air leaks to the exhuaust. fuel + air and flame + bam. sounds to me you lost cam timing i cant help

...cant get the key to turn. then how do i get the switch to the on post, so that it can be remove. thank u. I am not an expert, but it happened to me on Saturday night. I could not turn the key in any ...

...cant by just the end like some cables i ended up puting it on with zip ties for a min then bought a little baby c-clamp and that has worked great good luck u can reach down there and put it on enough ...

...cant figure out the problem Most times that is related to the cap, rotor, wires or ignition coil arcing when they are damp. If it's not starting because the engine starter won't turn the engine when ...

...cant find other end. 2 wires green wiyh orange and yellow with white, under dash by hood release magic HUNT day. no car told ,maker ,year, model and country and engine cars come with vast array of ...

...end. This car always ran just fine without any cooling/heating issues. It would stay at 200. ideas? Thanks in advance. TK i have 2005 phaeton that is doing the same thing . i am going to change the ...

run perfectly for several days then starts running really lumpy and cutting out. I've had a full service and new spark plugs fitted, nothing is showing on the diagnostic check, please can you help me.

...run out of gas, but I had plenty. It spit and sputtered and shut off. I was able to crank it and drive it another 15 miles before it shut off again. I replaced the fuel filter and the fuel pump, as ...

...cant even figure out whats wrong with it did they end up finding the problem with your lincoln? my 95 lincoln towncar had same problem, nobody could figure it out. turned out to be the crankshaft ...