2001 Dodge Intrepid "shift cable" Questions

shift cable. This cable may be getting a little worn. One way to check it is, disconnect the cable at the transmission and see if it is still stiff. Look under the hood, just to the right of the brake

...shift cable. Turn the ignition on but dont start. Undo the shift cable from the linkage and by hand turn the linkage down, shifting through all the gears till in low. Reach inside the car and put ...

shift cable? transmition link will shift fine if cable is disconnected. It is the shift cable. It is a dealer item, about 70 dollars. Plus there is a new bracket they will sell you to cure the problem

will not move into park lever pushs hard then goes back to reverse Try shifting into Neutral and attempt to Start the car. If this works, there is probably a problem with the cable and/or cable ...

...shift gears but it takes a lot of effort to move lever back and forth between gears. Any suggestions? I believe that the cable has to be adjusted. Most cases, the cable adjustment is off. Worst case ...

...shift cable keeps coming off under the dash....having some trouble locating that specific part online or anywhere else. usually replaced as an assembly (entire shift cable) I know they should just ...

...shift thru all gears and I can start car in Neutral. Any suggestions? The shifter cable is adjustable in the column. Remove the column covers and see if you can adjust the cable. You problem is with ...

cable at the shifter is just out of adjustment. Does it still shift, or move smoothly, just not all the way into park? Or does it feel stiff, do other people remark it is hard to shift, and is it also

...shift ok and then when it warms up we have to put the car in neutral and shut it off for a minute. When we turn it back on it shifts unless we have to go under 40 mph. Then it down shifts on its own ...

...shift cable. Make sure they're all in their proper positions and on their levers and none are damaged or broken. If you want to you can remove the small cable and now try shifting the gears. I ...