Question about Dodge Daytona
...90 degrees stage 3 ... angle tighten + 90 degrees stage 4 ... angle tighten + 90 degrees stage 5 ... angle tighten + 45 degrees Corsa 1.4i Engine code Z14XE 2000-2004 Bolts must be replaced after ...
Question about Vauxhall Cars & Trucks
...90 degrees stage 3 ... angle tighten + 90 degrees stage 4 ... angle tighten + 90 degrees stage 5 ... angle tighten + 45 degrees Remember use NEW bolts, these are called torque to yield bolts, they ...
Question about Opel Cars & Trucks
...90 degrees stage3. Angle tighten another 90 degrees stage4. Angled tighten another 90 degrees stage5. Angle tighten a further 45 degrees these as same for 1.4. 1.6 and 1.8 engines but not 2.0 gasket ...
...angle gauge - add another 90-degree to it 4. Loosen head bolts by one turn 5. Again, torque them to 30 ft-lb 6. Add another 90-degrees 7. Finally, add another 90-degrees using a torque angle
...bolts on a 2002 2 Litre 8V Cylinder head instructions Tightening sequence Renew bolts! Stage 1: Tightening torque = 40 Nm Stage 2: Tightening angle = 90 degrees Stage 3: Tightening angle = 90 ...
...settings are STAGE 1, 30Nm (22l bf ft) STAGE 2, 50Nm ( 337 lb ft ), STAGE 3, angle tighten another 90 degrees, STAGE 4 angle tighten another 90 degrees Cant help you with the cam bearing though ...
head bolt. You did not specify what motor.So I`ll give you both.The 3.1 is 33 ft.lbs.and additional 90 degree angle.The 3.4 is 44 ft.lbs.and an additional 90 degree angle.Hope this helps.Good luck
Question about Cars & Trucks
...- 176n = 360 4n = 360 Dividing both sides by 4, n = 90 Thus, you need a regular polygon of 90 sides to get an internal angle of 176 degrees. Hopefully you don't have to construct it. Good luck, ...
...the next pull 90 degrees using a torque angle wrench. Checking the specifications for the four cylinder: 25 Nm (18 ft lbs) on first pull and 90 degrees on the second pull using a torque angle
...(use new bolts) stage 1 ... 25 Nm (18 lb ft) stage 2 ... angle tighten + 90 degrees stage 3 ... angle tighten + 90 degrees stage 4 ... angle tighten + 90 degrees stage 5 ... angle tighten + 45 ...
54 questions posted
Usually answered in minutes!
39 Questions
35 Questions
17 Questions
13 Questions
44 Questions