2001 Chevrolet Silverado 1500 "tying wife" Questions

I need to bypass the heater core on a 2001 Suburban My heater core on my wife's 2001 Suburban is out and I need to bypass it until I can get it fixed. It has two metal hoses that connect to the two ...

Tie rod ends on 05 dodge durango My wife hit a curb and we need to replace the tie rod ends on passenger side I just wanted to know how difficult this is to complete? Hi there.... Tie rod ends are not

tie rod end; and sway bar bolt broken need a view or picture of the tie rods and one of the sway bar.my wife was told the tie rod was about to break and the sway bar was missing a bolt Those are in ...

On a 96 honda accord sedan does the outer tie rod end face down or up? I recently changed them on my wifes car and Im not sure i put them back right. Welcome to FixYa.com Down. Regards, Lee

How to removing the rear bumper bar The Rear bumper bar needs to be taken off to change an existing tow bar. I believe there are 4 bolts that are accessed in the rear (inside) that need to be removed.

replace 2001 lesabre tail light lense Need directions on how to replace the lense of my wife's right rear tail light lenses peel rug back from wall of trunk. there are bolts holding lense in/also they

I think it's bent. Wife slid into a curb. Are both the left and right supposed to be straight? What is "it" that is bent? What is both. I have no idea what you are talking about. The Tires? The Tie ...

My Pontiac Bonneville has a popping noise when i hit a bump i think its the tie rod ends i don't know if its inner or outer. How can i tell what the problem is and how hard it is to fix. does it kinda

steering wheel is off kilter, and truck pulls to left, hard Front end steering damage ( i.e pot hole, curb impact, wife drove it last) or worn out steering parts with possible sticking brake caliper. ...

I need to replace the inner tie rod bushings on my wife's 97 intrepid. I can't seem to get a wrench onto the nuts to remove the old ones as there is too much stuff in the way. What is the easiest way ...