...on the master switch one for LF(pin 6) other for RF (pin 7). The other feed for from master switch to RF is WH/YE. the next thing to do is pull the window switch and test it with a 12 volt test
...12 1/2 volts. With engine running, it should be @ 14 volts. If yes, then check for a bad connection at alternator. Look closely at the terminals for corrosion. There should be BK/DG wire supplying ...
...12 volts 0 volts Illuminated RUN-engine running 13- 15 volts 1/2 battery voltage 13- 15 volts 13- 15 volts 13- 15 volts 0 volts Off If the customer concern is verified after the initial inspection, ...
junction box from right to left if it is ok ground the dark blue wire coming down from the steering column to check the horn pad and ground. If the horn works you have a problem in the clock spring or
Question about Ford Cars & Trucks
...12.xV (battery positive voltage) on one side of the lamp and then around 5v on the other side of the lamp then it's a ground problem. Likewise if 0v on one side and ~7v on the other then it's battery ...
...12 volts and the battery light will come on. I've replaced the alternator, though the old one tested good, it did have a bearing that was going bad. I have cleaned every cable I can think of, I ...
12 (LG/BK) FOR AN OPEN Disconnect: Smart Junction Box (SJB) C2280e. Measure the resistance between the multifunction switch C2080-2, circuit 12 (LG/BK), harness side and the SJB C2280e-31, circuit 12
Question about Ford Cars & Trucks
...12 Volts, switched, when the headlights turn on? 2017 Ford F-150 XL I want to power some LED lights but only want them on when the headlights are on and I want them to turn off when the headlights ...
Question about Ford F-150
...fuse box, fog lamps are controlled by the i/p junction box built into i/p box , you didn't state it but did you test the fog lamp itself with 12 volt jumper wire ? i have seen both bulbs burn out
1,924 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,160 Questions
1,038 Questions
974 Questions