2005 Dodge Stratus "changing front turn light" Questions

TURN ON WHEN THE DOORS WERE OPENED AS WELL. THE NEXT DAY THE INTERIOR DOME LIGHT STOPPED TURNING ON WHEN THE DOORS WERE OPENED BUT CONTINUED TO WORK WHEN DONE MANUALLY. I ORDERED A USED SWITCH ON-LINE

...light turned on and the gasmileage was very high. He recommmended me to change the timing belt kit and the valve cover guskets because a lot of oil was leaking under the engine too. He changed these ...

...front of the car, reach under the hood, find the latch and squeeze it. Open the hood. 3. Find the spark plugs, located in a row along one side of the engine (on an in-line four-cylinder engine) and ...

...front or rear brakes? Drum or disk? I don't know the specific vehicle but there are only a few things that can cause this. Air in the brake lines. If you disconnected ANY of the brake lines while ...

front turn signal also goes on. Changed headlight switch, nothing changed. Fuses are good and stay good. The brake lights work but when you put the brake on, the front right turn signal goes on. After

...front right blinker. I put the new turn signal switch BACK on after changing out the turn signal/hazard flasher, and still nothing. I back probed the socket wire with the turn switch engaged and the ...

...front turn signal does not blink. front driver front turn signal does not blink. rear blinks rapidly, signaling front problem. Changed bulb did not work. light comes on when switched on but does not ...

changing front turn signal bulb to change the front turn bulb if there are 2 screws you can unscrew them or if its fixed you will have to remove the front Grill including the plastic cover around the ...

...to the back of the head light assy. Front Turn Signal Light Bulb Size: 1157A Rear Turn Signal Light Bulb Size: 1157 check too owners manual will show you how to thanks Lee let me know how it goes ...

front light bulbs are easily changed by twisting the plastic holder in the back of the lamp that holds the bulb counter-clockwise. You turn it about a 1/4 turn and then it pulls out and you can switch