2004 Ford Taurus "replace wires brake light" Questions

...and replacement is required. If your car is equipped with more than two wires integrated into the brake light switch a car repair manual is needed to locate the proper brake light circuit

...wires inside the outer insulator. The switch is above the brake pedal and very cheap to buy and easy to replace, do that first, if that doesn't cure the problem replace the connector, you can buy ...

...brake switch. check wire first , i've seen may of wires broken at that switch in those cars. check the connector to the light bulb there is a piece i there that gets too hot and melts and the whole ...

...and try the fuse again..If it doesnt blow then i would think the switch is bad..Also check around the brake lights and make sure the wires look ok..That is if your talking about the brake light ...

...brake light in the middle of the back window 1) Check your rear lamps to see if they are burnt. 2) There is a brake light switch behind the brake pedal. you may have a broken wire or the switch may ...

...replace bulbs,still do not work,someone told me that there is switch under brake pedal,which should be fix,how I can fix it,thank you just look under the dash with the lower plastic panel removed and ...

39;t come on even with new fuse You likely have a broken wiring harness at the brake light switch connector under the dash above the brake pedal. You can buy a replacement stub harness from Ford parts

...wires in the boot may be touching or the wrong bulb has been fitted in the brake light. Hope this helps Regards Dan Hi, This is the theory on what is happening. There is a brake light switch attached ...

wires. * Replace with a new switch. Adjust as needed. * Plug the wires back in. If you have a hydraulic pressure switch that is mounted in the brake master cylinder: * Mark and disconnect the wires. *

Brake lights aren't working due to blown fuse. When trying to replace the fuse the fuse gets real hot and melts. you have a short circuit in the brake light circuit or the shift interlock circuit.