...do you test a coil on a 1990 ford ranger? There is no spark to the spark plugs. no spark to the plugs you better of just to replace the ignition control module(its what is attatch to the
No Spark-1990 Ford Ranger 2.9L No Spark-new ICM, new Pick-up coil, new coil Check the Ignation Module
spark plug wiring diagram for a 1990 Ford Ranger 2.3L I'm confused about the wiring for the set of spark plugs on the drivers side. The order of the spark plugs on the passenger side is 1-2-3-4, but I
...spark plugs, and you've already made sure to check your wires and fuses/relays, then it is probably a problem with your coil pack. The ignition module on my 1990 Grand Wagoneer did the same thing. ...
all ignition parts brand new still no spark 1990 fd. ranger check the power dist. box under the hood there should be a 20 amp maxi fuse it may have blown or the contacts may be faulty
1990 ford ranger backfires and sputters checked timing took no.1 spark plug out checked rotor to see if it was in line. according to the timing gun the truck is timed but distributor has to be turned ...
...spark were could it be ? on a 1990 ford ranger , 4 cylinder standard First check that the ignition system is getting power. Don't use a test light. Use a digital multimeter. It is a must for ...
...spark plug layout (facing engine) on the block of a 1990 ranger 4.0 liter v6 its a distributorless ignition system so looking at engine left/passenger side is 1--2--3- drivers/right side is 4--5--6 ...
1990 ford ranger 2.3L running rough at idle and while driving While I was driving my ranger it started running real rough. It set for about 2-3 hrs and started ok, then ran rough, then all of a sudden
change spark plugs on 2.3L ford ranger (drivers side) everything I can think of Did you take the front tire off and try through the wheel well? http://www.answers.com/Q/Why_are_8_sparks_plugs_in_a_2.3
765 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions