2003 Ford Ranger Regular Cab "turn signal works intermittently" Questions

Ad

...turn signal doesn't work The right turn signal has stopped working, it was working intermittently but would make a crackling sound. The left turn signal works without a problem. The fuse does not ...

Ad

...turn signal connector clean it with electronic part cleaner. Make sure you cover the entire carpet area. The contacts inside the turn signal are cover with grease to prevent corrosion. Over time it ...

Ad

2003 ford ranger edge, when steering column is lowered, turn signals and brake lights will not work. when raised back up, will work fine. any help would be apppreciated. It sounds like there is an ...

Question about Kia Cars & Trucks

1 Answer

...work intermittently. While driving they mostly don't work at all but occasionally well blink a couple then stop, i don't know what's happening. The turn signal flasher unit needs to be

work only intermittently. You have to tap to relay switch on the four way flasher (dashboard) to get it to work intermittently. Replace the hazard switch, It has the turn signal flasher built in to it

...turn signal works intermittently. The multifunction switch seems to fine with no loose connections. The hazard lights work without failure. Any suggestions? What' My 2002 jeep grand ...

...turn signal) The left turn signal is intermittant, but the right one works just fine. When it is intermittant, the rear light is the one that doesn't seem to work. I've checked the ...

...turn signal fuse is ok. I have just found the recall info on the hazard flasher switch unit, which has not been replaced, but the hazard lights do work. Is it possible for the hazard lights to work ...

...Turn Signal Lamps The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, ...

turn signals work intermittently 2002 expedition turn signals work intermittently If fuses are clean and firmly fitted, and bulb sockets are clean, remove steering wheel and check spring loaded ...

Not finding what you are looking for?
2003 Ford Ranger Regular Cab Logo

789 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...