2003 Ford Ranger Regular Cab "gas" Questions

too much gas I'm getting raw gas out of the tail pipe, its running down and dripping off the bell housing. Theres gas in the oil and it sounds like its running on three cylinders. When I crank it over

the truck has been setting a long time i put gas in it but the gas hand doesent move and i think maybe a short somewhere how can i reset the fuel system i think there is a short in the wireing and the

...also only shows fuel gauge reading of 3/4 tank full when i know the tank is totally full. check ur gas cap first for proper seal and or not tightened this is the usual problem the evap system is

temperature gage in truck doesn't work neither does gas gage 1993 ford ranger i replaced both sensors an a new heater core and the gage in the truck still doesn't work my gas gage doesn't work either ...

I have a 1953 Ford tractor,4 cyl gas engine.It was running great when it ran out of gas.Two days later I put gas in it and it started up and ran about two minutes and started blowing oil/gas out the ...

I need a timing belt diagram for a Ford Ranger 2007 Engine L4 2.3L 140ci GAS FI N D Engine V6 3.0L 182ci GAS FI N U Engine V6 4.0L 245ci GAS FI N E Hope helps (remember rated this).

1997 ford ranger xlt the gas gauge will not work but all other gauges work?? hi gumy sound like a sticking float in your gas tank,this small float is what registers how much gas is in the tank

gas evaporation problem:Evap evaporation , faild by smog test It could be a simple bad gas cap, or a few of the sensors that are involved, or a bad line that runs back to the gas tank. You should have

...have a 86 ford ranger 2.3 l 4cy in mornings runs fine on way home everyday it starts not takeing gas its like u turn gas on and off on and off if u mash gas throttlwe down it runs till u get to

oil and gas my oil pan filled up with gas as I was driving, anyone know or at least some hint thanks your rings are giving out. the gas is seeping through them letting it get into your oil. If enough ...