...doing, take it to a qualified repair shop, you may break the cam 1998 contour replaced the timing belt and the cam potion switch still running funny is there a way to clear the codes with out a ...
cam timing tool to put at end of cams to align them and you need TDC @ #1 this motor has variable exhaust cam timing fed by oil press. the tool is just a flat piece of metal that fits in the groves in
Timing Belt/Chain Illustration Figure 1 Before installing tool. If the belt broke turn the engine so the #1 piston is half way up. This way you will not bend the valves while turning cams. If you feel
...cam, are those timing marks or just quality controll marks from the factory. If they are timing marks what position do they need to be in? If they are not timing marks is their timing marks on the ...
...cam timing. you will require some correspondence with this, first is the belt still on the vehicle? if so this is simple just index the cam sprockets to the cylinder head and do the same with the ...
CHECK ENGINE LIGHT CODE 1381 replace camshaft ford contour se 98 the actual code is "Cam Timing Advance is excessive" check your cam timing your timing belt may have slipped a tooth
...timing for the camshaft? Camshaft is timed with the crankshaft and the distributor is timed to both. The cam rotates at half the speed of the crankshaft. #1 piston must be at TDC (Top Dead Center) on ...
...cam timing, there are no marks on the cam gears. Ford has a special tool that fits on the camshafts to line them up. Then you line up the mark on the crankshaft gear and that is how the cam timing is ...
NEED TIMING MARKS 2.0L DUAL CAM FORD CONTOUR have no timing mark on crank the cam marks are on the cams under the valvecover the crank has a mark o nthe timing cover that you need to line it up to
1,277 questions posted
Usually answered in minutes!
534 Questions
405 Questions
353 Questions
309 Questions
276 Questions