settin timming and fring order Your firing order is 1-3-7-2-6-5-4-8, and timing is set to 10 degrees, distributor roatation is counter clockwise, Hope this helps, let me know
timing set i can get top dead center but not sue where sparks plug wire go i know the firing order nothing seems to work htis is on a 1963 ford falcon 170 cid Here is the firing order diagram for that
...info in order to set the timing properly. Thanks. Vin Number on car drivers side on dash call dealer or do a search on vin # You should order this ...
...order or bad timing belt or chain.Verify spark plug wires are on in correct order. If no one has been changing wires, check that when harmonic balancer is lined up at top dead center that rotor in ...
What is the firing order in a 1997 Ford Mustang 3.8 V6 1997 Ford Mustang 3.8 liter V-6 VIN "4" Cylinder # passenger side radiator to firewall, 1-2-3 Cylinder # passenger side radiator to firewall, 4-5
...order the parts needed and can give you free advice on how to work on replacing the damaged parts the fastest and easiest way. Good luck and hope this helps. hi i have a polo classic 2000 model it ...
my 5.0 back fires out the intake no matter wut i do with the timing I'd check the firing order. You may have some valvetrain problems, i.e. bent pushrod or bad valve.
...order and ignition timing. Ensure that you have connected the distributor up correctly to the coil. Check to see if the unit requires tacho (rpm gauge) wires connected. Some of these units need the ...
...order. Those are the "hoses" you see on the distributor cap. He changed the rotor $7 part. The timing won't make it shake. It can be off 10 degrees from specification an still run ok. Is it a 6 ...
is possible, it is not probable that it is the timing chain. It is extremely rare that a timing chain would go out on a 5.0. I would look towards spark and fuel delivery in that order. Hope this helps
270 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions