1995 Ford Contour "clutch fluid" Questions

...clutch master cylinder transmits fluid pressure to the slave cylinder, which in turn moves the clutch release fork and the clutch release hub and bearing. The clutch master cylinder uses brake fluid ...

...fluid in the clutch slave? it may be leaking. if it is full either the clutch slave cylinder has went bad or the clutch master cylinder. the slave cylinder is located in the transmission the clutch ...

fluid at the rubber boot of the rod. a clutch master cylinder normally will leak to the inside of the vehicle & down the firewall when it fails. Replace as required & bleed clutch system using

can't find where to put the clutch fluid doesnt it run off the brake resevoir

...and that would cause the tranny to shift hard. Take it in to the shop before it destroy's the clutches in the

...clutch solenoid.(TCC) This solenoid locks the engine to the transmission. Its disconnected by the brake light switch. It will only engage if your vehicle is at opertaing temperatures,cooling fan has ...

...clutch solenoid mechanical fault) I bought the solenoid but I am not sure if it is the problem And I don't know where it is located. can you help me to solve my problem. Its located inside the side ...

...EPC pressure, harsh engagements and harsh shifts. Another possible issue may just worn out clutches if the unit has high mileage or maybe verify fluid level and recent change of fluid. The ...

...it could be a misaligned transmission or something is loose in the clutch housing. But if your vehicle is an automatic you should check the transmission fluid (you do this while the car is

...clutch isn't disengaging fully. Check the master and slave cylinders and the hose for leaks, and make sure you have proper fluid level in the reservoir. If there are no leaks, then try bleeding the ...