1988 Ford Bronco II "ranger ignition module problems" Questions

Ad

Question about Ford Bronco II

1 Answer

Ranger....I had the same trouble. I swaped out the ignition module and put a bottle of alcohol dry gas in it. The MAP sensor wouldnt take care of this. Also the air charge temp. sensor my be bad. Also

Ad

Question about Ford Bronco II

1 Answer

...ranger no spark changed module on the side of distributor,replaced ignition coil,replaced coil in the distrubtor Did you replace the ignition control module, it is called the "TFI"? That is the most ...

Ad

...Ranger when it died on me. I checked the ignition coil but was getting no power so i changed the control module and the ignition coil. I still aint getting any power to the distributer. I have power ...

Question about Ford Bronco II

2 Answers

...ignition. Common problem with the Ranger, the hot wire breaks right at the ignition key switch. The solution is to replace the wiring harness (not the "entire" vehicle wiring harness, just the wiring ...

...ranger 3.0 v6 is still misfiring on cylinders 2 and 5. I've changed the spark plugs and ignition wire set. What else could be the problem? Perhaps the fuel filter or coil? most likely the coil or ...

...ranger 2.3 one coil fires and the other will not and it is not the coil i have changed it I can't remember what it's called exactly right now so please excuse me. The (ignition module?) on the ...

...ranger XLT 2.3 won't stat relaxed many parts what could problem? Replaced crank sensor coil packs fuel pump and engine module still won't stay running when starts what could be the problem? engine ...

Question about Ford Bronco II

3 Answers

...ignition module(distributorless) possible power relay in fuse panel underhood has failed.it is a black square plug in fuse block. these are available at parts store for about 6 bucks each.i had this ...

ranger 1988 does not exsit.if you are having spark problems you may be talking about the ignition module, i will encolse a picture and also tell you where to locate it. there are many auto part stores

Question about Ford Bronco II

1 Answer

...ranger ignition problem 1998 ford ranger doesn't seem to be getting any fire.it just turns over with no apparent unusual noises from engine.i tried starting fluid with no results. Do a basic check of ...

Not finding what you are looking for?
Cars & Trucks Logo

493 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...