I want to know how make flywheel ring gear,and how to contol it dementions because its fitting size are not same. BY using an oxy torch you heat up the ring gear....doing this expands it so that it ...
The engine sputters and dies when it heats up. Is this Vapor lock? On cold start it works great and idles just fine but as it heats, the engine starts choking and soon dies out. If this is vapor lock,
no heat from heater; is this a fuse or burned out motor; or broken fan belt on heater motor? end ### Could be low coolant. Plugged heater core. Bad fuse or blower motor. Or a bad fan switch.
how to keep ignition module from heating up Properly working ignition system Worn spark plugs stress it Not being properly grounded will do it in Low voltage will also Any corrosion that may be under ...
Heat/AC doesn't blow in 88 bronco II I have an 88 Bronco II and the heat/AC doesn't blow and the heat doesn't get warm at all. Windows fog up and now there is a strange smell in the car while driving.
Have already put dist. cap and new plugs It could be over heating.
84 bronco 2 over heating Check coolant level, then thermostat, then water pump circulation. If all are good then jump to head gasked, cracked head or block...
My father and I have replaced the water pump, thermostat, and the heater core and there's still no heat circulating Sure there isn't a control valve inline to heater core?
starter problems I have 85 bronco II Ihave replaced the fly wheel new one, not remanufactured and a brand new starter, when I crank it over the starter grinds very bad, sometimes turns over the motor ...
when you turn on the heat it blows cold Hello! Bring the engine to operating temperature...Turn the heat on high...Does the upper radiator hose get hot and hard?...Feel the heater hoses...Does one, ...
493 questions posted
Usually answered in minutes!
79 Questions
233 Questions
196 Questions
176 Questions
88 Questions