1988 Ford Bronco "cause passing gear stop working" Questions

Ad

Question about Ford Bronco

1 Answer

...passing gear and stayed there for about 20 seconds and then shifted back. From then on it was slipping in and out of gear while in drive. IN reverse it would slip really bad and make a really loud ...

Ad

gear in to drive all the gauges stop working and I get a no buS reading on the odometer space and the car feels like it's driving on the wrong gear. If I switch the gears while I'm driving like put it

Ad

...gear. If you stop completely and put it in park it will shift through all the gears again or while driving clear the codes with a scan tool. The codes that show up are:P0758,P1350,and P1375. The ...

Question about Ford Bronco

3 Answers

...passing gear, and potentially causing a slide-out. It also seems to help the tires grip better in 4WD while cornering. Use it primarily on icy or slick, snowy roads. The ...

Question about Ford Bronco

2 Answers

...passing gear instead of manually using the shift lever or pressing down on the accelerator far enough for the downshift of the transmission with Wide open throttle (WOT). It can also be used in the ...

...stop working from time to time. It does not matter the weather, temp or anything just decides to work when it wants to work i guess. There is a constant whining coming from i believe the belt but ...

...gear positions are indicated at the same time (I think). The ecu goes into limp mode as you have described. Removing and refurbishing or replacing the switch can fix this. Care needs to be taken when ...

Question about Ford Bronco

1 Answer

...passing another vehicle while the vehicle is fully loaded. At idle, the Envoy's computer should detect the falling RPM and make adjustments in fuel delivery to bring the RPM back up. In any case, it ...

...passing gear no longer works when depressing the accelerator fully at 40mph or above. I have read hundreds of similar complaints on the net but there is no concrete answer. There must be a clear cut ...

...passing gear lever located on the valvebody but it still shifting erregular. By irregular I mean that It goes to third gear by the time I am at 35 mph. I need to floor the accelorator inorder to ...

Not finding what you are looking for?
Cars & Trucks Logo

202 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Ford Bronco
1995 Ford Bronco

227 Questions

1990 Ford Bronco
1990 Ford Bronco

224 Questions

1994 Ford Bronco
1994 Ford Bronco

178 Questions

1996 Ford Bronco
1996 Ford Bronco

137 Questions

1992 Ford Bronco
1992 Ford Bronco

124 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...