1987 Ford Ranger "tape distributors" Questions

cant locate spout connecter If it has a distributor, it's taped on the right side of the engine in/around the large wire loom that crosses to the right fender.. I have seen the connector melted on the

...connector( should be located near hood hinge on fenderwell drivers side small Gray plug with pc of Tape around it ) or near distributor 5 using a pc of yellow chalk laying flat onto the Crankshaft ...

Where is the spout connector located on Ford Ranger 1987 2.3L 4 cylinder. and what does it look like. Hello pennockgaryc: My name is Roger and I will help you. The spout connector will be taped to the

...cable that connects to the fuse distributor box what should I do? Shout I get some electrical tape Well using the tape may solve the problem temporarily but would cause the hazard of the

...prevent the distributor from being incorrectly installed. REMOVAL & INSTALLATION Using masking tape, remove the spark plug wires from the cap and number them for installation as they are

...fit together as a unit when you get the two parts together]. First you need to mark with masking tape [or other such tape you can write on] the number of each spark plug wire and attach the tape ...

...easy to determine... trace NUMBER 1 CYLINDER wire back to the distributor... paste a bright color tape under the wire for number 1 cylinder on the distributor. Remove the cap and Number 1 SPARK

...assembly); a mark made on the casing/housing will be necessary for reassembly. Use a marker or tape so the mark doesn't rub off during handling of the case/housing. Mark the position of the

not getting spark and the distributor and cap are fine. the rotor turns but no spark. there is something plugged into the side of the distributor but I don't know what it is. Check all fuses. ...

... - Find number 1 cylinder and follow the spark plug lead back to the distributor. Write "1" on some tape and stick it on the cap. - Follow the next lead back to the spark plug. determine which ...