1987 Ford Ranger "hard reverse shift" Questions

Ad

hard. your reverse gear is the same exact gear as your first, so if you shift hard and grind that gear a little then reverse will be harder to get into. you probably need your transmission rebuilt the

Ad

Question about Ford Ranger

1 Answer

...hard into reverse and drive. it also shifts hard from 1st. to 2nd gear. do you have any ideas why that is. it shift great before changing the flywheel Since all gears shift hard, and the transmission ...

Ad

...to stay running after starting back up and putting it in drive My work truck run great until you put it in gear it would die it jerked hard in reverse like it was missing . And it was the shift ...

1-2 shifts very hard, seems to be late and slam - changed fluid, old was OK, forward reverse OK - What do you think Doug Known for solenoid pack issues. Need to get is diagnosed at a capable facility

Question about Ford Ranger

1 Answer

...shift 1st to2nd to drive but in reverse and drive takes off and drives real slow sounds like a transmission problem, does it slip or engine works to hard to move it? Check transmission strainer ...

...binding up. nplease help either the reverse gear is binding up in the trnsmission, the differential has issues or if its a stick(manual shift) the clutch needs adjusted or replaced..repost

...pedal. when driving shifting is fine but at a stop its very hard to get into first/reverse. no grinding most cases it's a bad slave cylinder try and bleed the system just like bleeding ...

...hard. if you have any questions email me at [email protected] good luck I have a 1992 F 150 5.8 engine automatic I put it in reverse made a noise now the reverse is out all forward gears drive ...

Question about Ford Ranger

1 Answer

reverse and gets stuck, and shifts hard in and out of gears. Also the overdrive on/off light is flashing again which supposedly indicates slippage inside the tranny. The techs have no idea why this is

hard into gear and then it slipped so bad it wouldn't pull. parked it and it drove fine until it heated up and wouldn't go into reverse. It has cooled off and now it will pull again. Possible solution

Not finding what you are looking for?
Cars & Trucks Logo

842 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...