1987 Ford Bronco II "starter" Questions

on the 5th. starter? The 5th. starter has been installed? A flywhell was installed with 1st. starter replacment. Get a shim kit for the starter. Disconnect the ignition so it won't start while ...

I Am Having Problems With The Starter On My 1988 Ford Bronco II I had no contact going to the starter everything checked out fine so I removed the starter and had it tested. It tested good and ...

the starter on my 86 bronco II flywheel issue the starter on my 86 bronco II wont engage the flywheel . i dunno what the issue is i heard i can get a different starter that will grab the teeth better ...

Starter drags when motor is hot. Just like a weak battery. I have checked battery at Auto Zone and battery is fine. Could it be a bad starter. This is for a 1986 Bronco II. if not the battery when it ...

...3-8 minutes the fual pump will shut off and the truck dies i them try to start it up and the starter sticks in the on position i them haft to disconnect the battey to make it stop i have ...

i have a 1985 bronco II 2.8l 5 speed manual, I replaced my starter 2 times and rebuilt my original starter so a total of three difernt starter's still nothing.. starter just spins.. I checked my ...

are there spacers on the starter of a1984 2.8 ford bronco 2 replaced the starter twice and still having trouble, won't start all the time acts like the starter bendix is not engageing properly

starter problems I have 85 bronco II Ihave replaced the fly wheel new one, not remanufactured and a brand new starter, when I crank it over the starter grinds very bad, sometimes turns over the motor ...

Have a 1988 Ford Bronco II 5-speed Manual 2.9L engine and am having issues with the starter. Bought a starter for it a month ago and it immediately sounded horrible but cranked about 10 times then the

starter not catching flywheel new starter and shim, but still doesn't catch and start. you can hear the starter spinning, the solenoid is 6 mo. old, battery connection clean and good, the teeth on the