...ignition switch cause the battery to drain down when car is off and setting for 2 or 3 days? Yes the faulty ignition switch can definitely drain the battery.Because actually the car is not got ...
Question about Ford Crown Victoria
...Ignition switch, or ignition lock cylinder? Its ware in the ignition switch not the key switch . Ford has had problems with this its 20 to 30 for the switch . It can also be tested with a multi meter ...
Ignition switch or linkage problems? 1996 ford crown Victoria: car starts put won't shut down. Ignition feels way too free. Obviously something is broken inside. Also, the steering wheel doe not lock ...
Question about Ford Crown Victoria
...ignition switch to start - heard pop - no electrical power Attempted to start car turned ignition switch to start position hear pop and then everything went dead. What can cause this problem. If ...
...ignition switch to getmy fuel pump on .I already replace the pump but it still does it every now and then yor ignition switch is bad (not key) its located on the column about 1/2 way down on top or ...
Question about Ford Crown Victoria
...ignition switch on my 94 Ford Crown Victoria turns freely without stopping at the positions. it starts but will not turn off. What is the problem? I replaced the Ignition Key lock Cylinder but the ...
Question about Ford Crown Victoria
...ignition switch. Car will not start or even make a sound.The ACC is continually ON now and we have to disconnect battery cable to turn it off. Free play in ignition switch. Even replaced switch ...
Question about Ford Crown Victoria
...ignition switch but it didn't work it was still moving freely wat is the problem now" "I have a 95 ford crown vic and the key ignition is stuck in the on position and i tried a new key ...
...ignition switch and/or neutral safety switch is failing. Please do not use the vehicle until you are able to inspect the ignition switch,the wire harness connected to the ignition switch and neutral ...
...Ignition Cylinder seems to be working fine (key turnes very well) i proceeded to use a flat screw driver to try to put the car in the off position and it didnt move (didn't force the flat head to ...
104 questions posted
Usually answered in minutes!
454 Questions
486 Questions
323 Questions
297 Questions
294 Questions