1986 Ford Crown Victoria "blend door" Questions

...blend door actuator on top of the hvac box. the actuator goes bad and doesn't move the door from hot to cold. if you see the actuator moving but still no cold air then the blend door could be ...

...blend door motor/actuator failing, this little motor moves a door deep inside the dash to either supply ho or cold air or a mix of the two air streams, hence the name "blend" door motor. to replace ...

blend door actuator was bad so I pulled the dash to replace the actuator, now its somewhat cooler but still not cold, so then I thought to check the codes on the eatc, it had codes 24 and 25, which is

...blend door problem.  The vacuum from the engine opens and closes the door that directs air flow thru the vents.I would guess the door is stuck in the middle of the range or something is blocking ...

...blend door actuater. What's the best way to get to it??? I may be wrong since it has been awhile since I have had to do one, but if I am not mistaken the blend door motor is located on the back side ...

...hot or cold coming out. the fan is now blowing any air. other wise it is a very good car. have your blend motor checked and you blend ...

...blend door motor hard to replace on a 2006 crown vic This a 5.5 hr job, it is hard to replace the dash needs to be pulled, i just did one and not fun, customer would not have heat at times and it was ...

blend door for the (hvac) system. Hvac being, heating , ventilation , Air Conditioning. The blend door is operated by a electric motor controlled by the HVAC module to adjust the position of the blend

HOWTO INSTALL BLEND DOORMOTOR HOW TO REPLACE BLEND DOOR MOTOR Do you mean the Temperature blend door motor?

blend door failed or short ford crown victoria 2004 w/ 158194 miles. DTC B 1249 blend door failed or short.i removed the instrument panel and replaced the actuator but still not working.there is power