1986 Ford Bronco II "remove 5 speed manual" Questions

Ad

Question about Ford Bronco II

1 Answer

...5 speed it is stuck between gears Remove the top cover of the trans (refer to service manual) and inspect the shift rails for freedom of movement or any broken parts, you may have a broken shift rail ...

Ad

Question about Ford Bronco II

1 Answer

...5 speed I shift to 5th and no noise just nothing there. Other than no 5th the transmission does good.My shifter linkage is fine to. check the drain plug magnet for metal bits. Mostly you can remove ...

Ad

5 speed manual trans. without disconnecting the drive line yes if you make sure the front hubs are disengaged(turn little hub releases in middle of the wheel,man trans is ok auto not ok you do need to

...5-speed Manual 2.9L engine and am having issues with the starter. Bought a starter for it a month ago and it immediately sounded horrible but cranked about 10 times then the Bendix locked up. Just ...

...5 or 6 bolts that from the factory,took a 13mm socket to remove.The point of the excercise of removing the driveshafts and the transfer case is because reinstallation with everything in place WILL be ...

...remove the back-up lamp switch assembly. 4. Install the switch with pipe sealant and tighten to 80-84 inch lbs. (9-9.4 Nm). 5. Attach the switch electrical connector. 6. Connect the negative battery ...

How do I remove a 1999 Jeep Cherokee 5 speed manual transmission? Jeep Grand Cherokee ZJ 5 2L V8 5 speed manual swap Explanation

Question about Ford Bronco II

1 Answer

...5 speed manual transmission. On the Left side of the trans-axle, Half way Up you will find the filler plug. Remove the plug. You can check with your finger. If you can not touch the lube oil you need ...

Question about Ford Bronco II

1 Answer

...5 speed manual. The 5 speed manual transmission in your Focus doesn't have a Dipstick, the fluid level is checked by going under the car and removing a fill plug on the side of the transmission ...

Question about Cars & Trucks

1 Answer

...remove my broken automatic transmission and replace it with a 5-speed manual one. Will my factory ECU still continue to work without any flashing or recoding procedures? My car is a 1999 VW Passat ...

Not finding what you are looking for?
Cars & Trucks Logo

250 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...