1986 Ford Bronco II "engine" Questions

1988 Bronco 2 stalling out. I have a 1988 Ford Bronco II. While driving, the engine will, at random, loose power and drop speed. If I floor the gas, it will come back up to power. If I let off the gas

how to remove a engine in a 1987 ford bronco 2 I need to remove the oil pan gasket and change out the clutch FIRST DISCONECT BATERY REMUVE THE RADIATOR REMUVE ALL WIRINGS FROM THE ENGINE ELECTRICAL ...

oil pressurer loss ford bronco2 I have a 90 bronco 2 , 2.9 v-6, oil pressure is dropping, as the engine gets warmer, it loses more pressure unless you keep the rpm's up. It is an automatic v-6, there ...

cold starts ok warms up shakes and stalls the engine and tranny shakes looses power and shuts off only cold starting runs ok check engine coolant temperature when it gets warmer, or at operating ...

I have a 89 bronco 2 with a 2.9 engine. I have I have a 89 bronco 2 with a 2.9 engine. I have replace the idle and o2 sensors, but the engine still idles rough and puts out an unusal ordor when idling

transmission type i have a 1990 bronco 2 4x4 straight 6 engine. it had a automatic trans. but someone put a manual 5 speed trans. in it can someone help me figure out what 5 speed tranny i need to ...

...2-5-3-6, the distibutor rotates clockwise. the cylinders are as follow on the passenger side of the engine it is 1-2-3 and the drivers side is 2-4-6, number 1 is the first one from the front of the ...

engine revs by itself ck engine light comes on engine revs by itself ck engine light comes on road speed kicks out of overdrive light comes on kicks back in overdrive light goes off when engine idles ...

how to change a 2.9 engine to a 4.0 engine want to know how to put a 4.0 engine in a 89 bronco 2 that has a 2.9 engine already in it. get a doner vehicle and swap the engine and wiring harness and pcm

...no spark, chances are it's the TFI ignition module. To narrow it down, turn the key on. The check engine light should be on. Now, crank the engine for a couple seconds while watching the check ...