1986 Ford Bronco "4x4" Questions

My 4x4 does not work, the light does not come on, the lights dim slightly when you push the button. Any suggestions? 4x4 Troubleshooting guide - Ford Explorer and Ranger Forums ... ...

i have a 92 bronco and my 4x4 switch on the dash doesn't work the 4x4 switch does not light up or work im thinking maybe a relay because the inside fuses are all good that have to do with the 4x4. ...

4x4 will not engage on my 1990 Bronco. Light does 4x4 will not engage on my 1990 Bronco. Light does not work, I hear no sound when I push 4x4 or low range button. It is a 302 not 351 if that matters. ...

trans my freind has an 88 bronco full size 4x4 with a 95 5.8L 351 will the trans. out of a 95 F150 4x4 bolt up without any problems? if they are same size engine, it should be fine

rear drive chain 1992 ford bronco 4x4 I need to know how to install a rear drive chain on a 1992 ford bronco 4x4.It would be extrememly appreciated. i don really understand what you mean by drive ...

My electronic 4x4 does not disengage on my 88 ford bronco The 4x4 light is probably triggered by the vacuum disconnect on the front axle. The disconnect is probably buggered.

4x4 hubs make grinding/clicking when its not in 4x4 above 25 grinding/clicking under 25 it is poping like the hub is trying to lock in on the left side Check the cv joints as they make that sort of ...

1991 Bronco wont go into 4 wheel high or low push the button for 4x4 high or 4x4 low ant the front end never engages, it just staays in rear wheel drive sticky or broken lockout ,take apart and ...

I have a 1979 ford Bronco and I am Having trouble with 4x4 I have a 1979 ford Bronco and I am Having trouble with my four wheel drive. I have a violent popping noise from the front. It starts popping ...

what do i need to do to convert my c-6 4x4 tranny into a 4x2 tranny get a 4x2 tranny, and replace the 4x4 tranny and 4x4 transfer case with it, you will also need to remove your front drive shaft, ...