1983 Ford Bronco "turn signal" Questions

...turn signal lights do not work. The right signal light on the dashboard stays lit all the time. Is it probably my turn signal switch, a fuse, or the bulbs? The brake light and the turn signal are the ...

The turn signals and flashers suddenly stopped working in my 1996 ford bronco. I recently had someone working on a problem I was having with the rear window... the following day, the turn ...

Tail lights and rear turn signals in 1996 F Bronco stopped working: My 1996 Ford Bronco worked fine until the alternator decided to stop working. Got that replaced, along with a new serpentine belt, ...

...turn signal lever. I assume that the lever is the issue. The turn signals don't work, but the hazard lights work. The windshield wipers also still work. Just not the turn signals. Thanks. you should ...

...turn signal/brake but not when im just turning on my lights ...please help If you are not getting power from the headlight switch for that circuit, but the other side works, you'll have to trace the ...

...turn signal switch on a 1989 Full Size Bronco, not a tilt wheel. You will need to remove the steering wheel...using a steering wheel puller, or a harmonic balancer puller...the turn signal switch is ...

turn signal went out and I replaced in and it still did not work but the rest of the turn signals worked. I then took it to a shop and they looked at it for twenty minutes and could not figure it out.

...TURN SIGNAL ,AND STOP LIGTH , BUT HAZARD SWITCH BURNIG THE FUSE ,SO I FIND THE PROBLEM ON THE TURN SIGNAL CAM SWITCH , AND WHEN I TRYU TO INSTALL NEW IGNITION SWITCH ALL MY POWER GO OUT LIKE THERE IS ...

not signal turn working On position signals work, after start...stop working Have you tried replacing the flasher, its under the dash.

...control module on the steering column and it ran for a few minutes. Tried to restart, but would not turn over. Had power to fuel pump, P/W, P/L, blower motor, headlights, hazards. No turn signals, ...