1988 Ford F 250 "key not turn ignition" Questions

...turn the key doesnt lock or unlock the steering --when u turn the key toward on it will unlock steering the ignition cylinder has a tab that releases the steering so when turned off the steering will ...

...turn on the key to engage the motor, but it will not start until you flip the toggle. That should get you by until you can replace the ignition switch in the column. ok great the key does not turn at ...

...turn key back just a little after engine starts, allowing the ignition switch to stay where it should be if it were to return on it's own. Better fix: Replace ignition cylinder. Not a bad idea, ...

...power, no light no nothing. Batteries both still fully charged. Key will turn to on position but shifter will not come out of park. Try wiggling the steering back and forth while turning

...Key-shaped light coming on on the dashboard every time you turn the ignition ON. If this light is flashing when you turn the ignition ON, it could mean that there is some problem with an immobilizer ...

...turn the key. Everything else seems to be working fine. It has done this before and usually would start after cycling the key on and off several times. It seems to turn over very strong when it ...

turn the key everything is normal, but when i start it the relays just click. Saturday I had it checked out for same problem, but nothing was found. Starter, selenoid, batteries tested out fine. Could

key in frustration you'll here the truck fire a couple of times (not enough to start but you can clearly here it hit on a couple of cylinders). This momentary ignition seems to only happen as you turn

...key would just turn in like a half circle thing but would not go in the RUN postion and auctally star, it stays clicked in on the OFF, May I please get some help! Hello, When you installed the Key ...

...turn the key to off position it stays running.I bought new battery and altenator. it start when I put the new altenator in Does it keep cranking like when first starting or is it running normally and ...