...1989 f250 7.3l diesel was cranking slow, but now won't start.when i make contact between ignition and starter solinoid i get a spark but no normal "click".i suspect the starter is bad, could ther be ...
1989 f250 lost all power driving down the road. i could barely drive it back home ,it would not go over 25 miles an hour.i tuned it up even put on a new cataletic cnverter,vacume hoses ,spark plugs ...
...1989 F250 4x4 7.3 diesel? I'm trying to replace the clutch and brake peddle support pivot bracket that is broken. I've gotten the bracket unbolted from steering column and fire wall, the brake and ...
1989 Ford F250 Diesel is spiking to red in temp gauge I just purchased an 89 F250 diesel (new to me). Seemed to run fine - have run it uphill once or twice with no problem. Last week, ran uphill ...
...1989 ford f250 Hello mikejjgreene: My name is Roger and I will help you. From the driver side of the dash.The inertia switch is located at the far left side of the toe board. Where the firewall and ...
1989 ford f250 and need to know what electric psi pump i need and also if I am able to just hook it up to the fuel lines and run power to it, or do I have to do more work to the fuel system to elimate
...1989 E350's front brake calipers, heat transfer, and brake pedal fade. (Luckily I"ve found TSB 98-5A-29, which is of some use for this E350 problem, if my E350 has it)... I assume I'll be using ...
405 questions posted
Usually answered in minutes!
907 Questions
705 Questions
546 Questions
442 Questions
465 Questions
