...the cheapest place to start. You may have a bad connection at the fuel pump module. Or the fuel pump and sending unit, which is attached to the fuel pump module is bad. I would also check the
...fuel gauge sending unit in the gas tank, in fact that is the only thing i have ever found wrong in my 40 years as a mechanic, 30 of which were at a Ford dealer. Either the gage in the dash is bad or ...
...Fuel gauge on full is usually a bad sender (in the tank). 0-400 ohms should give a reading (200 ohms is half a tank - not sure if this is the exact number). Bad connection could do this,
...bad fuel pump. If after switching the lines, it does run, then you need a new selector valve Well we know the switch valve,at the tanks is not working,but,is the manual control switch not sending the ...
...fuel gauge is clear past full all the time even if you switch tanks I'd look for a bad or broken ground somewhere, either feeding both tanks, or the gauge itself, but start at the sending units and ...
fuel gauge wont work on 7.3 diesel. is there a way to test it ? is it dual tanks? it could be in the switch if it is, most of the time it is bad grounds to the tank unit. grounding the wire from the ...
Diesel fuel gauge goes to full at all times this is a sign the sender in the fuel tank is bad. will need to be replaced
...fuel filter bowl has fuel in it and I can hear the pump kick on. These 6.0 diesels had bad injectors to start with, so I would definently have those checked, how many miles do you have on it
...diesel fuel gauge read empty then full whats wrong 2006 F350 6.0 Engine light Code is reading bad fuel gauge sensor could this effect fuel pump and performance. Can I wait until have time to
fuel filter. there if you move the plug for the fan clutch you can see an auxillary plug on the filter housing facing forward and to the driver side. You should have 40+psi with key on. another way to
771 questions posted
Usually answered in minutes!
448 Questions
438 Questions
414 Questions
360 Questions
311 Questions
