2003 Ford Windstar "tool fuel filter" Questions

Ad

...tool into the cavity of the fuel line to release the fingers. Do not try to pull the lines apart without the tool. You will damage the lock. Should you need further help please just ask. Please rate ...

Ad

Question about Ford Windstar

1 Answer

...fuel line. With the tool it is very easy. Replace with a new filter and snap your fuel lines back on. Make sure the arrow showing which way the fuel flows is pointing toward the front of the vehicle. ...

Ad

Question about Ford Windstar

3 Answers

...fuel filter is located under the vehicle on the driver's side frame rail Driver side under van around driver side door, on inside of fram rail. are any special tools needed to remove and install the ...

Question about Ford Windstar

3 Answers

the special tool to release hose connections to the fuel filter, not all of them though.Make sure to note BEFORE you remove the old filter which way the flow/inlet needs to go for reinstall. Good luck

Question about Ford Windstar

1 Answer

...tool, or a screwdriver and then pull the fuel lines from the filter and loosen the clamp. Install the new fuel filter the opposite, but use new retaining (hairpin) clips and insert them gently, after ...

Question about Ford Windstar

1 Answer

tool to unhook fuel line , and due to high pressure on fuel injection supply even with engine off (pump is inside tank) I don't suggest a non professional attempt to do this there self , it's purely a

Question about Ford Windstar

2 Answers

Fuel line removal tool A plastic set may be purchased at the parts store for about $10. Looks like http://www.google.com/products/catalog?rlz=1T4GGLL_enUS361US362&q=fuel+line+removal+tool&um=1

...synchronize so don't pull out. also your fuel pump may be getting weak. you can try cycling key a few time to build fuel pressure before starts,replace fuel filter also and make sure air filter is

...fuel line connectors. Does this take a special tool, as it's not a bolt on type but more of a slip on connector. Any help would be much appreciated. Thanks! John you can release the pressure by a ...

...Fuel Line Removal Tool T90T-9550-B or tool supplied on vehicle. Tool is located 254 mm (10 in.) behind fuel filter. Place in glove compartment after use. Install new retainer clips in each connect ...

Not finding what you are looking for?
2003 Ford Windstar Logo

1,636 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,830 Questions

2001 Ford Windstar
2001 Ford Windstar

1,838 Questions

2000 Ford Windstar
2000 Ford Windstar

1,503 Questions

1999 Ford Windstar
1999 Ford Windstar

1,212 Questions

1996 Ford Windstar
1996 Ford Windstar

600 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...