back sides work passengers doesnt work i was told to replace relay I dont know whick one to replace Doubt it is a relay,all but one window works! Are you just going to buy a new one,without knowing if
Question about Ford Windstar
...replace a broken vent window in the back of a 01 ford Windstar? Remove the plastic trim from around the window to expose the hinges and mounting jamb. Unsnap the motor gimbal if equipped. Remove the ...
...regulator. you must remove the interior door panel, drill out some rivets, and replace the faulty parts. (rivetting some of them back in) sorry, but this is not usually a DIY job. Maybe consult a
replace with bolts,lockuts and washers.. jm 2001 ford windstar van window will not roll up on drivers side and the back window on drivers side will not roll out. the driver door lock is not responding
...back windows won't roll down. Is it the motor...and how hard is that to replace myself? Might sound dumb, but check the 'override' button on DRIVERS DOOR gang switch is not depressed, does what your ...
...back vent windows do not work properly.Window on the passenger side does not open or close using the switch on the passenger side(only opens and closes using the switch on the drivers side).The vent ...
...back in, and what do you know it started working. so I tested for 15 mins stiaght and it statred working every time I pushed the button. So, I would try that first before you spend over $70 dollars ...
replace the motor without removing the regulator? if it is the same as my 1996 ford you have to unhook the cables from the slide(the metal bar the window slides up and down on) and they are located at
...back air conditioning vents; grinding noise when vehicle locks doors What is the solution for window not working? the rear air is switched with vacume and the fan is switched with electricity to ...
1,636 questions posted
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
600 Questions