2003 Ford Focus "lower arm bolt torque" Questions

what is the torque setting on a 2007 ford focus lower control arm ball joint bolts/nuts 40 to 55 ft/lbs

ARM, LOWER CONTROL ARM FROM STEERING KNUCKLE. REMOVE BOTH LOWER CONTROL ARM BOLTS. REMOVE CONTROL ARM. DURING INSTALLATION TORQUE LOWER CONTROL ARM BOLTS 120 FT LBS. CONTROL ARM STEERING KNUCLE TORQUE

...lower intake manifold bolts (two on each end) to 25 Nm (18 lb ft). rocker arms 14 N.m (124 lb. in.) plus 30 2.2L Engine & 2.4L Engines These engines are not equipped with rocker arms. The ...

...for the lower ball joint arm need to know the torque settings for the lower ball joints arm Hi The following torque specs apply : 8 mm Bolt - 55 NM 10 mm Bolt - 85 NM 12 mm Bolt - 115 NM Regards ...

...arm, you need place jackstands under the frame and lower vechicle so the weight of the vechicle rests on the jackstands and not on the control arms, then remove the front wheel remove ball joint and ...

...Lower arm inboard bolt250185? Lower arm outboard bolt275203? Parking brake cable bracket bolt10?89 Shock absorber lower bolt275203? Shock absorber rod nut6548? Shock absorber upper mount nut3022? ...

...lower control arm off 1994 geo metro. stuck at ball joint. remove ball stud bolts .then remove suspension arm bracket nut .remove suspension arm bracket bolts. remove rear bracket and suspension arm. ...

lower control arm nut/bolt and the strut Strut-to-chassis nuts/bolts and the strut Lower control arm Tundra To install: Install or connect the following: Strut to the chassis. Torque the nuts/bolts to

lower arm and torque the bolt to 88 ft. lbs. (120 Nm) Upper strut mounting nuts and torque to 36 ft. lbs. (50 Nm) Brake hose bracket Front wheel Check and/or adjust the wheel alignment. --------------

...arm Lower swivel joint to plinth Steering arm to hub carrier Track rod end to steering arm Damper to lower wishbone Damper to top anchor bracket Damper anchor bracket to chassis Hub bearing unit to ...