2003 Ford Focus "intake manifold leak cracked" Questions

...from the intake manifold. They collapse and leak. If it is skipping you may need a new coil. Check for weak fire and cracks on the side of coil. Tranny light may be a solenoid inside the

...light flashes. Check coil for cracks and weak spark on one side. Check pcv hose that connects to the intake manifold as they will collapse and leak. It will turn the light on. Check while

...came on Quite possibly a vacumme leak. check all around intake manifold for vac hoses disconnected and /or cracks where they connect either to manifold or trace to end location and chec there ...

...intake manifold for collapsing and leaking. Check while engine is running if it is leaking it will cause the light to come on. Also a dirty air flow sensor will cause a lack of power. Check ign coil ...

intake manifold gasket, cracked head or cylinder. You or a technician can do a coolant pressure check or compression leak down test, to verify leak into engine or pull plugs and see if they have a wet

...intake manifold to pipe. They get soft and collapse, crack and leak air. Be careful if you remove the hose as the nipple on the intake is plastic and is part of the intake. It has a pressed on clamp ...

all the time. It had weak spark on one side of coil and had small cracks on the coil. You should also check the rubber hose that goes to the pcv from the intake manifold as they will collapse and leak

...intake manifold get soft and collaspe and well soon crack and log a check engine lite for bank one lean, due to vacuum leak, pcv valve is driver side front corner of the engine block just below the ...

...intake manifold is a "wet" type (coolant goes through it for any reason) that gasket may be leaking and letting water in the oil. But I'm leaning toward a new head gasket. In either case, water is ...

...intake. Possible having to remove the valve covers first.exhaust manifold(s) will have to be removed. Then you can remove the heads. There will be many electrical connectors that will have to be ...