2003 Ford Focus "drive belt tensioner" Questions

Ad

drive belt tensioner when put new drive belt on. The tensioner does not need to be reset. It has tension to apply to the belt to keep it on at all times. If its weak you can move the tensioner by hand

Ad

...belt. you do this by using a ratchet handle. Im not sure what size it is. either a 3/8 drive or a 1/2" drive. the sqare drive will slip into a square hole on the tensioner's end, then you can use the ...

Ad

Question about Ford Focus

1 Answer

...or a 3/8" drive breaker bar. Snap the drive handle into the hole and turn in the direction that releases tension on the belt. Make sure to release the arm slowly to avoid injury once the belt is

...drive belt lower cover. · Note belt routing and make a sketch for your reference if you don't have a belt routing diagram from the manufacturer. · Find the belt tensioner pulley. Use your ...

...belt for a given accessory drive system. Unless a spring or damping band within the tensioner assembly breaks, or some other machanical part of the tensioner fails, there is no need to check the ...

Question about Ford Focus

1 Answer

drive belt routing diagram w reg ford focus Somewhere under the hood, usually on the fan shroud or near the radiator, there should be a sticker with a diagram of the belt routing, 2001 may even be on ...

Question about Ford Focus

1 Answer

...drive belt of ford focus having no tentioner ? TENSIONER LOOK LIKE A PULLEY IT SELF, LOOK FOR PULLEY WITH A CENTER BOLT.THE TENSIONER PULLEY WILL BE BELOW ALTERNATOR ON THE 2.3 VINZ ENGINE AND ...

...says "drive belt routing" You need to release tension on the tensioner pully with a serpentine belt tool or a long 3/8" breaker bar. rout the belt according to the diagram, then re apply the ...

...drive belt tensioner is there a tool,or spanner as I put a new drive belt on and the belt is to tight and is screaching quite bad.How do you reset the tensioner?Thanks. self ajusting must have bad ...

accessory drive belt and tensioner and any other items that were disconnected. · 5Hook up the negative battery cable. Start the engine and check that the timing belt is functioning properly

Not finding what you are looking for?
2003 Ford Focus Logo

3,146 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...