2003 Ford Focus "brake master" Questions

Ad

Question about Ford Focus

2 Answers

...master to brake master. some have there on fluid housing, open the hood and look at the driverside rear of the engine compartment , look at the brake master cylinder, you will see the brake fluid ...

Ad

Question about Ford Focus

1 Answer

brake booster vacuum hose. Extract master cylinder from vehicle. On models with manual transaxles, remove clutch hose from brake/clutch reservoir. On all models, remove master cylinder nuts and remove

Ad

...brake pads/shoes wear. Fluid level will decrease in the master cylinder resovoir. If the master cylinder ran empty you will need to refill with appropriate brake fluid (should say DOT 3 on cap) and ...

Question about Ford Focus

1 Answer

...brake failure Either somebody ripped out your brake line(s) or master cylinder stopped working, those would be the main causes.  Behind your master cylinder, is there a round, dome shape?

...Master cylinder was low on brake fluid. Filled the mc and brakes are still mushy. Do I need to bleed the brakes, and if so, how? Thank you very much. Mike i would say your brakes are getting worn out ...

Question about Ford Focus

2 Answers

master cylinder at the brake lines to clean it out,then start at the right rear wheel,then the left rear wheel,then the right front wheel,and then the left front wheel,do this in order. If your system

...a small amount but I can't see where it is coming from. I have a 52 reg Focus 2litre Zetec Sounds like it clutch master cylinder or brake master cylinder/ booster is leaking. Check your fluid

...brake master only if the brake assistance is ok same thing is happening to my ford. Leaking and flowing down the pedal and the rubber pedal cover fell off. Haven't found the exact source of the leak, ...

Question about Ford Focus

1 Answer

...brake pedal down slowly while you slacken each pipe a small amount tightening the pipe on the down stroke. when you are satisfied there is no air in the master cylinder proceed as follows starting ...

...bled the brakes, but it hasn`t made any difference. Is it the servo? It is the Brake Master cylinder or you have lost Vacum to the Master Cylinder. replace the master cyclinder and you should be

Not finding what you are looking for?
2003 Ford Focus Logo

3,146 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...