2003 Ford Focus "13 light car going" Questions

...But I cannot locate a fuse. CHECK FOR BLOWED 15 AMP FUSE TO THE INSTRUMENT PANEL CONTROL OR YOU HAVE BAD CONNECTION AT THE 13 PIN SOCKET.COULD HAVE LOOSE OR BROKE WIRES GOING INTO THE 13 PIN

...light flashes 13 times. and stops then flashes 72 times and stays on for a long period then it does it again. I just changed the oil and i washed the engine compartment. I know my tranny is going out ...

...light on dash and no rear running lights The body control module (BCM) controls the park lamp relay by grounding the control circuit of the park lamp relay when the headlamp switch is turned to the ...

...will blow strong then cut back. If you're running the car under a heavy load, lights will dim briefly (ie. you turn the ac on full) With the engine running, the leads on the battery should read ...

...light switch and I noticed another type of switch that resembles it. I still have no brake lights and this all occurred after i took my car to an automechanic. He tried to charge me $209 dollars just ...

...light coming on. there is a little spring that has come loose behind the headlight on/dimmer switch in dash. what is going on here? alternator voltage output should be between 13-14 volts. get your ...

...light) 7/16/13 -- 28,987 miles -- passenger side marker light out (the one that they didn't replace on 6/19/13) 1/22/14 -- 33,759 miles -- driver side head lamp and side marker out Six bulbs in under ...

...light) 7/16/13 -- 28,987 miles -- passenger side marker light out (the one that they didn't replace on 6/19/13) 1/22/14 -- 33,759 miles -- driver side head lamp and side marker out Six bulbs in under ...

...running lights off, then check with lights on. You need a minimum of 12.5 volts but should have 13-14 volts even with lights. check wires at alt and starter. and battery terminals. if you can, ...

Light turn ON and OFF with each command? YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems NO - Go to Step 3 Turn the ignition OFF. Remove the transfer case select