...v6 fuel system 1987 ford f 150. Fuel system not responding when key is turned. No fuel pumps working. I think the relay may be working cause I can here it click when I turn the key. Could be ignition ...
...V6 I replaced the engine with a 1999 mustang 3.8ltr I used all my existing intake off my old motor which was told to me it would work. I cant seem to get it to run right. I have replaced various ...
...V6 4WD. Sporadic, but will stall when stopping. Seems to be better if stopping is gradual. But does start right up. Dealer found no faults, and of course it didn't do this after we took it to the ...
...v6. If this is the case, there are two intake runners per cylinder, one long (torque) one short (horsepower), default setting for these would be long runners or closed. There is a valve so to speak ...
...v6 eng. the throttle assy motor failed. this put in limp mode (45mph only) solution was salvage part as new was 1200.00 check w/shop that can confirm 1st of corse. car-part.com is my favorite ...
...motor FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could ...
V6, 5 speed manual, styleside (i think). Check engine light on, codes say 02 sensor. How many do I need to buy??? I keep reading different numbers, ranging from 2 to 4. Thanks! bank 1 sensors you have
...v6, there is a vibration when you start the engine after it heats up, it runs perfectly well. I brought to Ford and they replaced 6 spark plugs. The problem is still there, they now say that the ...
...v6 how do I identify the crankshaft bearing cap position or location. The engine was given to me in a box and I don't know which bearing goes or whether they go in a certain order or it ...
914 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions