2002 Ford E-Series "fuse wiring explorer" Questions

...fuse for the alternator on a 2002 ford explorer I see two or three,the schematic shows two in series coming of the wire from the battery junction box to the back of the alternator and a third coming ...

...wiring. See top right 'power distribution box' follow lines to the part of your engine you are concerned with, which fuse number, then look inside your engine, passenger fender, push down on the ...

fuse boxes and power boxes and color coded wiring routing. Check for other items that are on the same fuse as the turn signals to see if they work. The turn signal flasher unit could also be bad. Just

...fused as one. in some cases, there is an in line fuse on the positive [red] wire coming from the radio. it should be tucked under the dash below the radio. next to the wiring harness. hope this

...Explorer... I cut the wires and taped over them separately. Now the radio and power windows don't work... Do these wires need to be connected? Could I have blown a fuse? Any help would be greatly ...

...fuse is fine, the problem is either the window switch on the drivers door or the wire is bad that provides power. Remove the door panel and meter the switch, if you get power to the switch but not ...

...explorer fuse box diagram Google Search On my explorer I had problems with door ajar light and interior lights staying on, sometimes. Found broken wires in the harness between drivers door and door ...

...explorer? fuse 6 underhood, fuse 17 under dash, also these vehicles break wires in boot between door and body. If all the windows are affected, it may well be the fuse. But the wire running through ...

...tell if it is faulty wiring is to pull all the fuses out of the fuse block and try to start it if the engine turns over the problem is internal wiring. If not then you have to put all the fuses

fuse in my 1992 ford explorer keeps blowing when i start the vehicle. im not sure why but i think somewhere along the wiring is messed up. please help. sounds like you have a bad relay that is shorted