2001 Ford Windstar "engine removal" Questions

Ad

need to know how to remove oil pan with engine still in vehicle on 96 Ford Wind Star 3.8 engine. What will I have to remove to get access to it. 3.8L Engine Fig. 2: Oil pan assembly - 3.8L engine ...

Ad

Question about Ford Windstar

2 Answers

...and hits a hard point during the rotation. Mechanic suggests it's a bad cylinder and that engine should be replaced. Flywheel appears ok. Engine was rotated with belt on but starter

Ad

...Removal 1. Disconnect the battery ground cable. 2. Drain the cooling system. For additional information. 3. Remove the accessory drive belt. 4. Raise and support the vehicle. 5. Disconnect lower ...

Removal Drain engine cooling system. Refer to Section 03-03 . Loosen drive belt tensioner (6B209) and remove drive belt (8620). Refer to Section 03-05 . Raise vehicle on hoist. Refer to Section 00-02

Question about Ford Windstar

1 Answer

2000 ford windstar how do i remove the water pump It would be best to drop the engine, but can be done by only removeing 3 of the engine support bolts (only loosen the the one under the drivers seat) ...

how do you change thermostat and where is it located the thermostat is located onthe engine.follow your top radiator hose to the engine,where it clamps on to the engine,at the point it clamps at if ...

Remove water pump on 3.8 liter v-6; does this require removing engine mount and lifting engine? Yes.It has to come up about 5 inches.Remove the lower hose from the bottom.Hope this helps.Good luck.

Question about Ford Windstar

1 Answer

...Engine Compartment. 5.Remove Ground Strap Attatchment (If Present) From Heater Core Tube. 6.Remove Cassete Box.Center Instrument Panel Support Trim. 7.Pull Out And Remove Cup Holder. 8.Remove Rear ...

...and replacments Unfortunately, it doesnt really give any information on removing / installing the engine mounts other than to raise and support the engine assembly with a suitable device and then ...

...I have removed all the bolts and it is loose but it don't seem to fit out of the bottom.the engine is held up by a jack, and I hear that the subframe has to be removed but it appears to be ...

Not finding what you are looking for?
2001 Ford Windstar Logo

2,720 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,830 Questions

2000 Ford Windstar
2000 Ford Windstar

1,503 Questions

1999 Ford Windstar
1999 Ford Windstar

1,212 Questions

2003 Ford Windstar
2003 Ford Windstar

1,032 Questions

1996 Ford Windstar
1996 Ford Windstar

600 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...