2001 Ford Windstar "4 intake manifold runners" Questions

INTAKE MANIFOLD CONTROL RUNNER Where are the bushings and how easy are they to install? Seems like an easy job, dealer wants $85 for job and it's a $10 part. Any ideas?? Thanks. Hi!!! ok. you nedd one

...intake runner solenoid (this one is on the back of the upper manifold) runner position sensors (only on 3.8 liter engine) evap purge valve all 4 oxygen sensors MAF sensor all fuel injectors cam ...

...4 misfire will definitely throw a bunch of codes because of the + leak to - and the other sensors here will be getting + voltage where there shouldn't be next if your getting the 0401-0402 that's the ...

...intake manifold,1995 toyota 4 runner water leak under the intake manifold, 1995 toyota 4 runner There is a heater core bypass pipe that runs from the block (under the manifold) to the bacl of ...

...cyl engine) is on top of engine mounted to the coil housingthe 3.0 v-6 engine is located under intake manifold runner 1,3,5, on back and 2,4,6, on front under intake manifold runner. hope this ...

...4 days. OBD II Code = P1518 (intake manifold runner stuck) (open) (bank 1) HELP THERE IS A VALVE ON THE RIGHT SIDE OF THE INTAKE MANIFOLD THAT OPEN THE RUNNER.IT HAS A VACUUM LINE TO IT.FOR IT TO BE ...

...4. Disconnect Secondary Runner Valve (SRV), Manifold Tuning Valve (MTV), Throttle Position Sensor (TPS), Idle Air Control (IAC) motor electrical connectors.5. Remove the electrical connector and the ...

...4, #, #5 and #6 intake runners . It is real difficult to get to. You have to remove all the upper intake runners and if you do be sure get new gaskets as the old one's will rip or leak. The bolts ...

...a 4.7 2003 4 runner its under the manifold Big job......you need to remove upper intake manifold it is just under ilt, new gaskets a plus and get a factory replacement unless you want to do it

Where egr value located It is located under the intake manifold between the number 4 and 5 intake runners