96-97 WS6/SS: 305bhp, 335lb-ft 93-97 Firehawks: 315bhp, 340lb-ft Factory LTX Camshaft Specifications**: 1992 Y-body: 205/207 0.451/0.450 lift 117 LSA 1993-1995 Y-body, F-body: 202/207 0.450/0.460 lift
...96 probe, 2.0L 4 cylinder. Should be similar to 626 I think. Starter Motor Removal Exploded View of the Starter Motor Mounting Components CAUTION: When servicing the starter motor or performing other ...
where is the oil filter location on my 96 Nissan Pickup it has the 4 cyl engine. under intake manifold
...96 ford windstar and the check eng light is on. the code is p0304 camshaft position sensor bank one sirect malfunction. have replaced the sensor and still the same thing poping and jerking. please ...
96 tracker will load up with gas. will run in 4 low if floored. already replaced computer and injectors. i dont know much about trackers but if there is a manifold pressure sensor i would check that ...
96 grand am pop under accelation car pops under accelation Which engine 2.4 Twin Cam or 3.4 V6? The 4 cylinder engine is based on the old Quad4 and I would guess it's either running lean (weak fuel ...
...96 escort 1.9L Engine Components Item Part Number Description 1 6766 Oil Filler Cap 2 6A548 (8 Req'd) Valve Cover Bolt 3 6582 Valve Cover 4 ? Exhaust Manifold Shield-to-Exhaust Manifold Nut (4 Req'd) ...
96 chevy exspress wrk van 5.0 v8 where is the ignition coil right side of engine,on the intake manifold apx. 3/4 of the way back on motor
...off then the starter should be in plain site and all you have to do is unbolt the starter put the new one on starter should be under the air intake, I have the 96 4.0 and thats where my starter is
Question about Ford Windstar
...96 4 wheel drive Tracker 4 door 1.6 is the engine size. When I removed the intake manifold and fuel rail there were 2 hoses on the manifold, one goes to the fuel rail and one to the bottom of the ...
856 questions posted
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
1,032 Questions