1996 Ford Taurus "wiper works high" Questions

, Fuse 215 (30A) Multifunction switch Wiper run/park relay Wiper high/low relay Windshield wiper motor Circuitry Battery junction box (BJB) CJB Generic electronic module (GEM) ------------------------

...High speed seems ok. Contact's in wiper switch worn or corroded! Replacement needed is it a ford? Or Toyota? :) A windshield wiper is operated by a wiper motor from an electric source, with a control ...

...wiper blabes are not working? Check the corresponding fuse in the fuse box. If fine, could be the multi function switch that controls/adjusts wipers, blinkers, high beams, etc.. Hope this

...works on high There are two relays that control the wipers an the relays are energized by the SJB - smart junction box , ford's name for a BCM - body control module . Do you know what a body control ...

...high speed. The repair shops tells us it is the Gem module does that seem logical? Most fords I have worked on do have a seperate module for the wipers. It's called the wiper control module. Usually ...

...high beam or windshield wiper. Low beams and turn signal work. When I push the button for the wiper fluid the motor runs. Question edited for clarity. Question moved to correct year make model ...

high an then listen under the hood you should hear the wiper motor unless its junk but if you hear it then the problem is with where the motor connects to the wipers, if you don't hear anything at all

...wiper speed is slow it only works on "high/fast" setting. I'm thinking it's either relay or multi-function switch, but despite looking in Chilton's and on internet, I'm ...

...works on high, if it was the motor it would not work at all. Wires are good because there is power getting to the motor. Most likely cause is the wiper switch. Thats the control for voltage flow to ...

...high speed only but not on delay. And don't know where wiper delay board is. ??? usually attached to the motor in the form of a black box. where is the wiper delay board located in a 2005 Ford ...