1996 Ford Ranger SuperCab "gear shift" Questions

gear very easliy. Then it takes a while to shift gears and drop the RPM's down. The RPM's will go up to about 4500 until it finally shifts. Not sure if this is normal or if I should have it checked or

...shift out of 1st gear i have to manually shift from 1st to 2nd gear then to drive then it seems fine this is a 2.3l 4 cylinder its a possibility, you have a bad modulator valve on transmission. that ...

...gear we can shift it manually underneath the truck into gear but the lever isn't shifting the linkage the linkage has slipped and is not in the notch on the shift lever so slide he shift lever into ...

...gear pattern, not in the middle. I had her shift for me at a standstill and sure enough they would flash one when she hit the top of the 5th gear slot. It does not happen every time, but enough so I ...

...so if you shift hard and grind that gear a little then reverse will be harder to get into. you probably need your transmission rebuilt the harder your engine has to work the more its going to bogg ...

...ford ranger shift hard it shift hard from first gear to second gear what you think is wrong with it??? Try changing the gear oil to a lower grade.Sounds like the rong grade of oil has been put in

...shift. Maybe gear box heating up would check fluid level Sorry to hear this no shift problem. The shift fork gets hung up from slack caused by wear. In some transmission it like 3rd gear or 4th gear ...

...gear shift thru all the gears but the truck won't move. Checked the fluid level and it is fine. also checked the shift rod and passing gear cable and both are ok. what could the problem be? it sounds ...

...overdrive will shift if let off gas to lower rpms, passing gear will not kick down just revs to higher rpm low fliud pressure in transmission..check levels and change fluid/filter and retry

...shift out of whichever gear its in. i can feel the shifter through the gears but it wont let it leave the gear its in, just put a new clutch, flywheel and master slave in and dont want to destroy it ...