1996 Ford Ranger SuperCab "change serpentine belt" Questions

Ad

Question about Ford Ranger

1 Answer

...change out an alternator on a 97 ford ranger. It has a 6 valve, 3.0 litre engine. How do you loosen the serpentine belt? It has a belt tensioner. On the tensioner should be a nut put wrench on and ...

Ad

Question about Ford Ranger

1 Answer

serpentine belt it was lose tenson pulley was lose how do i tighton could that be the problem. please help Yes, the loose belt certainly seems to be the possible problem in this case. It's likeley the

Ad

...serpentine belt or timing issue?? if it has been awhile since the belt was changed it may be a good idea to change it and get a timing light and check the timing also make sure the beads in the ...

SERPENTINE BELT ON 2001 3.0 FORD RANGER? These are fun to do for they are easy once you read on.. The tensioner has a square hole on it. The size is 3/8" which a ratchet will fit in perfectly. Have it

...change serpentine belt on a 1996 ford ranger. Usually it has a diagram on the underside of the hood The picture is belt routing, 96 ford ranger w ac. See the tensioner, it will have either a cavitity ...

Question about Ford Ranger

3 Answers

serpentine (drive) belt. check your belt for cracks and or glazing. depending on the ford model you own there also a part called the camshaft synchronizer that goes bad (sounds like crickets just like

...serpentine belt (or fan belt) then you didn't change the timing. just put the belt on. if you have changed the timing belt then get a Haynes book from Autozone. it will explain the whole thing in ...

...Change the serpentine belt, do an oil change, air filter change, inspect your brakes and rotors, change out the gear oil in the rear end, inspect and replace your shocks if needed upon inspection, ...

...serpentine belt. Tried changing idler sprocket, no difference. I added the lubricant to the radiator, unfortunately the weather was cold, and the lubricant did not mix well with the radiator fluid, ...

...serpentine belt is necessary. Is the stock axle sufficient?? Any other advice? Thanks. Dan You'll also need to change the steering box. The stock axle should be okay to use. Be careful hooking up the ...

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

744 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...