1995 Ford Ranger Supercab "high idle 1996" Questions

...high idle can you give me some ideas about what to do? In my 1996 ranger xl my high idle problem was due to a bad ect sensor. After I replaced that I have had no problems with high idle. Not sure if ...

...problem. Could be wiring circuit--connector or maf sensor. There might be a vacuum leak causing a problem? If fuel trim is high at idle, but, returns to normal under load, it's usually a vacuum

...idle speed. Also, if the vehicle is put in gear while high revs, it jumps. Any soultions to problem will be greatly appreciated. Thanks With out a check engine code there could be few things that can ...

high (above 80 degrees). The engine computer (ECM) is faulty and is running the engine at the incorrect air/fuel ratio. The coolant system has blocked passages caused by previous engine work where the

idle high problem i have a 1996 potiac Grand Am and when its cold it runs at a high idle untill you turn the vehicle off and start it again. But sometimes even after you do this is will start the high

high idle o n a 1996 chrysler concorde. have change the tps and the idle air control valve. i think its a vacum line but i dont know which one. which one s effect the idle High idle is usually caused ...

High idle of 1996 Elantra saloon car (1.8 cc) when engine is on. Idle does not come down to low. Need advice on how to repair the high idle and on correct spark plugs for 1996 Elantra saloon car, 1.8 ...

High idle on start; may or may not idle down It likely has EFI (electronic fuel injection) and an idle air control valve that regulate idle speed. They can get gummed and fail to have a fast idle when

...high idle I have a 96 grand am replaced thermostat and in the process took off housing unti to fuel injector. when put back together it now idles high can not get idle to lower. Any suggestions on ...

...idle is extremely high -turned down idle screw all the way -still revs -help! you should not mess with idle screw, you are changing tps values,computer controls idle,check for vacum leaks,may be a ...