1995 Ford Ranger Supercab "change idle control valve 1987" Questions

...changed out the idle control sensor and the oxygen flow valve on the intake ,no change. I had to replace the air by pass valve when my 1987 ford ranger supercab was doing that... good ...

change the idle speed on this truck or do we have to replace parts? it may be this or the ( pcv valve ) pcv get clogged alot on old fords.The idle air control valve (IAC) control the engine idle speed

...drops off.....I changed the idle control valve but that did not help.... Sounds like it's not gettin fuel. I'd start by replacing the fuel filter. If that doesn't help, then i'd replace the fuel

...idle speed reg. on my 1986 240DL Volvo and now it idles 100 miles an hour This is the air control valve,did you hook up every ok .Recheck everything,all hoses,vac lines,sometimes these dont need ...

...change the idel speed of the car. It may not be a sensor, might be in the connector at thr sensor, or somewhere in the harness. Check the connections at the throttle position sensor, and the idle air ...

...idle air control valve and it seemed to change it a little but didnt fix it. Need to know if it might be something else before I drop the $100 bucks on yet another part. Thanks for everyones time. I ...

will start them immediatly shut off. I checked my coolant and it's in dire need of being changed. Would my engine be shutting down because it's overheating? mass air flow sensor, or idle control valve

...what could be my problem ? I've changed the map sensor, the engine coolant temperature sensor, idle air control valve motor, and the throttle position sensor with no luck. Check the spark plugs ...

...change it is by re-jetting the throttle body? there is a set screw in the front of the throttle body, to adjust it, but first why do you need to adjust it ? if low idle then it could be your TPS or ...

...idle air control valve and checked fuel pump and changed fuel filter and checked vacume lines with no change what else could it be also had throttle body cleaned have you checked the crank position ...